djs
New Member
Posts: 35
|
Post by djs on May 31, 2021 21:03:23 GMT
|
|
djs
New Member
Posts: 35
|
Post by djs on May 31, 2021 21:04:20 GMT
|
|
djs
New Member
Posts: 35
|
Post by djs on Jun 2, 2021 15:38:29 GMT
|
|
djs
New Member
Posts: 35
|
Post by djs on Jun 2, 2021 15:38:51 GMT
|
|
djs
New Member
Posts: 35
|
Post by djs on Jun 2, 2021 15:39:21 GMT
|
|
djs
New Member
Posts: 35
|
Post by djs on Jun 2, 2021 15:39:44 GMT
|
|
artur
New Member
Posts: 8
|
Post by artur on Jun 2, 2021 22:29:39 GMT
Beautiful. Can you share the stickers as a pdf file? |
|
djs
New Member
Posts: 35
|
Post by djs on Jun 2, 2021 23:00:34 GMT
Sure, here it is. It is actualy an Adobe Illustrator file, there are some comments inside, go check them.
The cutting plotter marks are suitable for Mimaki SRIII machine. Cut curves are on a seperate layer. |
|
artur
New Member
Posts: 8
|
Post by artur on Jun 2, 2021 23:10:25 GMT
Sure, here it is. It is actualy an Adobe Illustrator file, there are some comments inside, go check them.
The cutting plotter marks are suitable for Mimaki SRIII machine. Cut curves are on a seperate layer. Thank you so much! I don't really have such sophisticated equipment, but there are print shops in my city that can do the order. |
|
djs
New Member
Posts: 35
|
Post by djs on Jun 2, 2021 23:22:53 GMT
You may want to remove the fourth LED hole, that i made for my custom Power LED before bringing them the file.
I could publish my Tauon hardware mod pics inside here, but i am a bit shy because it does not look as good as it works.
|
|
artur
New Member
Posts: 8
|
Post by artur on Jun 2, 2021 23:41:22 GMT
I already received my computer yesterday. I like the way you modify the Tauon PC. I understand what you do and why you do it, so I will repeat your modifications. For example, yesterday I tried to connect the computer to the monitor and realized why you made the sound in the case. Thanks for the good work
|
|
djs
New Member
Posts: 35
|
Post by djs on Jun 3, 2021 0:03:11 GMT
Also, it seems to be a mistake with Volume+ and Volume- buttons. I have VOLUME_DOWN at the left bracket [ and VOLUME_UP at the right one ] in my Generic.kcm file. I dont' mind it, it's a no big problem, really. Original ZX Spectrum had severe bugs in production ROM  Maybe i will correct the mistake in Illustrator file and print correct stickers later or maybe i will change Generic.kcm or ignore it at all... |
|
djs
New Member
Posts: 35
|
Post by djs on Jun 3, 2021 1:21:27 GMT
Corrected volume mistake and made some changes.
|
|
djs
New Member
Posts: 35
|
Post by djs on Jun 4, 2021 23:34:49 GMT
Обновил стикеры. Внёс по просьбе Автора Tauon некоторые изменения. Немного высветлил серую полосу. Made some refreshment to stickers. Made some changes as to Tauon Autor's request. Made grey stripe a bit lighter.
|
|
|
|
Post by activeconsult on Jun 11, 2021 14:03:46 GMT
Oh wow this is stunning work ! |
|
