|
Post by Admin on Oct 13, 2021 0:11:53 GMT
Hello, first of all - don't worry, it's (almost?) impossible to brick Tauon with a firmware update. If there is nothing on the screen - look through holes on the front. If you see blue light blinking - this means that the update is in progress. Just wait until it finishes then remove SD card and reboot the computer. If the computer does not recognize firmware on the card - try using a different card or different microSD-SD adapter. If this won't help either - unscrew your TauonPC and insert the microSD card directly to the port on the board. Be patient while updating firmware, there are times when it could appear frozen but it is still in progress.
|
|
|
Post by jayson on Oct 13, 2021 0:33:59 GMT
Thank you! I just got it to work with the Retro build of the Firmware. It did the BIOS screen and is now blank. Solid blue light, I read online that first boot takes a while so I should just continue to wait?
|
|
|
Post by Admin on Oct 13, 2021 12:54:01 GMT
Hello, please let me know if this installation was successful? If the problem persists this could be a hardware malfunction. In this case please reach me back through the channel you bought the Tauon PC and I will send you a replacement PCB.
|
|
|
Post by jayson on Oct 13, 2021 22:14:09 GMT
I bought directly from you, I'll email with my transaction ID.
|
|
|
Post by Admin on Oct 14, 2021 23:00:37 GMT
Sorry for the inconvenience. Two new PCBs are on their way.
|
|